To stop movement and lock the bucky into position, release the switch.
CAUTION:
The maximum load for the bucky movement in vertical direction
is 20 kg. The bucky may slip downward when applying excessive
load.
Note: Do not move the bucky with excessive force to the end
stop positions.
Tilting
To tilt the bucky, press and hold the button on the tilting handle and move the
bucky. The scale for the angle is visible at the mounting point of the bucky.
To lock the bucky into position, release the button on the tilting handle.
Note: The bucky can be tilted to horizontal position. Do not use
the bucky as a seat.
212 | DR 600 | Radiographic Wall Stand
3261K EN 20210708 0808
To Next Page
Loading...
