Rotating the bucky .................................................221
Loading of the bucky in the Radiographic Table ..... 222
Loading of the bucky in the Radiographic Wall Stand ...
223
Unloading of the bucky in the Radiographic Table . 224
Unloading of the bucky in the Radiographic Wall Stand
....................................................................................225
Opening the bucky drawer configured with an earthquake
kit ..........................................................................226
Automatic Cassette Size Sensing ............................ 227
Bucky types ........................................................... 228
Cassette and detector formats ................................ 230
Standard cassette formats ...................................... 231
DR Detector formats and orientation ..................... 232
Orientation of DR 10s in the bucky .............233
Orientation of DR 14s in the bucky .............234
Orientation of DX-D 10C, DX-D 10G in the bucky
........................................................................236
Using DX-D 45C, DX-D 45G, XD 10, XD⁺10 only
outside the bucky .......................................237
Grids ..................................................................... 238
Anti-scatter grids ....................................... 239
Grid focal distance color indication ............240
Grid detection ............................................ 241
Storage box for DR Detector and grids ........242
Changing the grid configured with an earthquake
kit ..............................................................243
Automatic Exposure Control (AEC) ........................244
X-Ray Generator Mini Console ........................................... 245
Starting and stopping the generator .......................246
X-ray tube start-up modes ...................................... 247
X-ray generator messages and warning signals (Spellman)
....................................................................................248
X-ray generator messages and warning signals (EMD) .
249
Exposure parameters ............................................. 250
Radiographic Parameter Limits ..................252
Exposure termination ............................................ 254
Problem solving .................................................................255
Restoring connection between generator and NX after
generator failure ....................................................256
Automatic collimation always too wide or too narrow ..
257
NX does not connect to the generator due to ID tablet ..
258
No table movement ................................................259
No movement when using remote control .............. 260
DR Detector is Exceeding the Maximum Working
Temperature .......................................................... 261
DR Detector must be Recalibrated ..........................262
vi
| DR 600 | Contents
3261K EN 20210708 0808
To Next Page
Loading...
