6 Method Parameters
Set the 2D-LC Method parameters
2D-LC User Guide 136
Define Parameters for Time-Based Heart Cut
1 To switch between Multiple Heart-Cutting (MHC) and High Resolution
Sampling (HiRes), click the down-arrow.
Figure 74 Parameter window in the sampling table for High Resolution Sampling (HiRes)
settings and Multiple Heart-Cutting Settings (MHC)
if you use the optimization function in the reference chromatogram the analyze mode in the
sampling table can be changed automatically
It is possible to combine MHC and HiRes measurements in one single 2D-LC run.
To Next Page
Loading...
