Agilent Technologies 1290 Infinity II 2D-LC User Manual

2D-LC User Guide 137
6 Method Parameters
Set the 2D-LC Method parameters
2 To choose an analyze mode, click the down-arrow from the drop-down list.
• Selecting default:
The cut is analyzed as soon as possible.
• Selecting Delayed:
Analysis is delayed until there is an available time slot.
• Selecting Ignored:
The cut is not analyzed.
3 To specify that analysis of one or more cuts should be given priority, mark the
Prioritize cut(s) check box.
NOTE
If you use the optimization function in the reference chromatogram, the analyze
mode in the sampling table can be changed automatically.

Agilent Technologies 1290 Infinity II 2D-LC Specifications

General

Brand	Agilent Technologies
Model	1290 Infinity II 2D-LC
Category	Measuring Instruments
Language	English