2D-LC User Guide 157
6 Method Parameters
Preview (2D-LC)
Figure 80 Example of a loaded Q-TOF signal with shift volume set to 0 µL compared Q-TOF
signal with shift volume set to -100 µL
This tool removes the current reference chromatogram from the Preview.
This tool switches to Multiple Heart-Cutting mode (MHC). This tool can only be
used if heart-cutting is selected in the 2D-LC Operation mode. The function is
used with the Add/Delete or Sample all function.
This tool switches to High-Resolution Sampling mode (HiRes). This tool can only
be used if heart-cutting is selected in the 2D-LC Operation mode. The function is
used with the Add/Delete or Sample all function.
This tool switches to Peak-based mode.
This tool switches to Time-based mode.
In one 2D run the MHC and HiRes modes can now be combined.
To Next Page
Loading...
Need help?
General
