Front-Panel Controls 2
6000 Series Oscilloscope User’s Guide 99
To print the display
You can print the complete display, including the status line and
softkeys, to a USB printer or to a USB mass storage device by
pressing the Quick Print key. You can stop printing by pressing
the Cancel Print softkey.
To set up your printer, press Utility&Print Config.
For more information on printing, see “To configure
printing” on page 302.
To set the clock
The Clock menu lets you set the current date and time of day
(24-hour format). This time/date stamp will appear on hardcopy
prints and directory information on the USB mass storage
device.
To set the date and time, or to view the current date and time:
1 Press Utility&Options&Clock.
2 Press the Year, Month, Day, Hour or Minute softkey and rotate
the Entry knob to set to the desired number.
The hours are shown in the 24-hour format. So 1:00 PM is hour
13.
The real-time clock only allows selection of valid dates. If a day
is selected and the month or year is changed so the day is
invalid, the day is automatically adjusted.
Year set Month set Return to
previous menu
Day set Hour set Minute set
To Next Page
Loading...
Need help?
General
