Getting Started 1
6000 Series Oscilloscope User’s Guide 41
11 When the instrument is found, select OK and OK to close the
Add Instrument windows.
Now the instrument is connected and the instrument’s Web
interface may be used.
To use the Web interface
All 6000 Series oscilloscopes include a built-in Web server
(requires software version 4.0 and above). See page 322 for
information about updating your oscilloscope’s software.
When you connect to the oscilloscope using a computer and web
browser, you can:
• Control the oscilloscope using the Remote Front Panel
function.
• Activate the Identify function (see page 47) to identify a
particular instrument by causing it’s front panel light to
blink.
• View information about the oscilloscope like its model
number, serial number, host name, IP address, and VISA
(address) connect string.
• View oscilloscope firmware version information and upload
new firmware into the oscilloscope.
• View and modify the oscilloscope’s network configuration
and status information.
To Next Page
Loading...
Need help?
General
