Saving and Printing Data 7
6000 Series Oscilloscope User’s Guide 315
You cannot create new file names in the oscilloscope’s internal
memory, you can only overwrite the existing files.
5 When you have selected the file name to be overwritten,
press the Press to Save softkey to save your current setup and
waveform trace to the file.
To save traces and setups to a new file on the USB mass storage device
1 Follow steps 1-3 in the procedure on page 314.
2 Turn the Entry knob and press the far left softkey to select a
directory on a USB mass storage.
3 To create a new file name, press the New File softkey.
New file names can only be written to a USB mass storage
device, not the internal memory.
To Next Page
Loading...
Need help?
General
