342 6000 Series Oscilloscope User’s Guide
9 Characteristics and Specifications
6000A Series and 6000L Series Environmental Conditions
Overvoltage Category
This product is intended to be powered by MAINS that comply
to Overvoltage Category II, which is typical of cord-and-plug
connected equipment.
Pollution Degree
The 6000 Series Oscilloscope may be operated in environments
of Pollution Degree 2 (or Pollution Degree 1).
Pollution Degree Definitions
Pollution Degree 1: No pollution or only dry, non-conductive
pollution occurs. The pollution has no influence. Example: A
clean room or climate controlled office environment.
Pollution Degree 2. Normally only dry non-conductive pollution
occurs. Occasionally a temporary conductivity caused by
condensation may occur. Example: General indoor
environment.
Pollution Degree 3: Conductive pollution occurs, or dry,
non-conductive pollution occurs which becomes conductive due
to condensation which is expected. Example: Sheltered outdoor
environment.
To Next Page
Loading...
Need help?
General
