302 6000 Series Oscilloscope User’s Guide
7 Saving and Printing Data
To configure printing
You can print to a file or you can print to a USB printer. Use the
Print Config menu to choose the type of image file you would like
to create or to set up your printer.
You can print scale factors, print in color or grayscale, and
choose whether to print each waveform on a separate sheet of
paper (form feed). To conserve printer ink, you can invert the
graticule colors so that the background is white instead of
black.
Selecting a print file format
To choose a file format, press Utility&Print Config&Print to. You
can create an image file in one of the following file formats:
• BMP (8-bit) image file — The screen image is converted to a
smaller, lower resolution bitmap file of the complete screen,
including the status line and softkeys.
• BMP (24-bit) image file — This is a larger, high-resolution
bitmap file of the complete screen, including the status line
and softkeys.
• PNG (24-bit) image file — This is a high-resolution PNG format
bitmap file of the complete screen, including the status line
and softkeys.
• CSV data file — This creates a file of comma-separated variable
values of displayed channels and math waveforms. This
format is suitable for spreadsheet analysis.
Select
grayscale or
color
Print to
file or
printer
Browse to
location for
saving file
Return to
previous menu
Options
This softkey
selects
Length when
printing CSV
To Next Page
Loading...
Need help?
General
