Reference 8
6000 Series Oscilloscope User’s Guide 327
To return the instrument
Before shipping the oscilloscope to Agilent Technologies,
contact your nearest Agilent Technologies sales or service office
for additional details. Information on contacting Agilent
Technologies can be found at www.agilent.com/find/contactus.
1 Write the following information on a tag and attach it to the
oscilloscope.
• Name and address of owner
• Model number
• Serial number
• Description of service required or failure indication
2 Remove accessories from the oscilloscope.
Only return accessories to Agilent Technologies if they are
associated with the failure symptoms.
3 Package the oscilloscope.
You can use the original shipping container, or provide your
own materials sufficient to protect the instrument during
shipping.
4 Seal the shipping container securely, and mark it FRAGILE.
To clean the oscilloscope
1 Remove power from the instrument.
2 Clean the external surfaces of the oscilloscope with a soft
cloth dampened with a mixture of mild detergent and water.
3 Make sure that the instrument is completely dry before
reconnecting it to a power source.
To Next Page
Loading...
Need help?
General
