42 6000 Series Oscilloscope User’s Guide
1Getting Started
Controlling the oscilloscope using a Web browser
A built-in Web server allows communication and control via a
Javaâ„¢-enabled Web browser. Measurements can be set up,
waveforms can be monitored, screen images can be captured,
and the oscilloscope can be operated remotely. Also, SCPI
(Standard Commands for Programmable Instrumentation)
commands can be sent over the LAN.
Microsoft Internet Explorer 6 is the recommended Web browser
for communication and control of the oscilloscope. Other Web
browsers may work but are not guaranteed to work with the
oscilloscope. The Web browser must be Java-enabled with Sun
Microsystemsâ„¢ Java Plug-in.
Operating the oscilloscope using a Web browser
1 Connect the oscilloscope to your LAN (see page 37 or 38), or
establish a point-to-point connection (see page 40). It is
To Next Page
Loading...
Need help?
General
