Getting Started 1
6000 Series Oscilloscope User’s Guide 43
possible to use a point-to-point connection (see page 40), but
using a LAN is the preferred method.
2 Type the oscilloscope’s hostname or IP address in the web
browser.
3 When the oscilloscope’s Web page is displayed, select
Browser Web Control, then select Remote Front Panel. After a few
seconds the Remote Front Panel appears.
4 Use the Main Menu and the Function Keys to control the
oscilloscope. This is a manual way to control an oscilloscope
which is normally controlled by a remote program.
NOTE
If Java is not installed on your PC, you will be prompted to install the
Sun Microsystems Java Plug-in. This plug-in must be installed on the
controlling PC for Remote Front Panel operation.
To Next Page
Loading...
Need help?
General
