Viewing and Measuring Digital Signals 3
6000 Series Oscilloscope User’s Guide 117
To switch all digital channels on or off
1 Press the D15 Thru D0 key to switch the display of the digital
channels on or off. The Digital Channel Menu will be
displayed above the softkeys.
On 6000L models select Digital from the main menu or press
ctrl+D.
The digital channels are displayed when this key on the
6000A models is illuminated.
If you want to switch the digital channels off, and the Digital
Channel Menu is not already displayed, you will have to push
the D15 Thru D0 key twice to switch the digital channels off.
The first push displays the Digital Channel Menu, and the
second push switches the channels off.
To switch groups of channels on or off
1 Press the D15 Thru D0 key on the front panel if the Digital
Channel Menu is not already displayed.
2 Press the Turn off (or Turn on) softkey for the D15 - D8 group or
the D7 - D0 group.
Each time you press the softkey, the softkey’s mode toggles
between Turn on and Turn off.
To switch a single channel on or off
1 With the Digital Channel Menu displayed, rotate the Entry
knob to select the desired channel from the popup menu.
2 Press the softkey that is directly below the popup menu to
switch the selected channel on or off.
To Next Page
Loading...
Need help?
General
