Agilent Technologies MSO6012A User Manual

268 6000 Series Oscilloscope User’s Guide
6 Displaying Data
You can use the Delayed horizontal sweep mode for easier
navigation of the acquired data.
Interpreting Decoded I
2
C Data
NOTE
If the setup does not produce a stable trigger, the I
2
C signal may be slow
enough that the oscilloscope is AutoTriggering. Press the Mode/Coupling
key, then press the Mode softkey to set the trigger mode from Auto to
Normal.

Agilent Technologies MSO6012A Specifications

General

Brand	Agilent Technologies
Model	MSO6012A
Category	Test Equipment
Language	English