Agilent Technologies MSO6012A User Manual

Displaying Data 6
6000 Series Oscilloscope User’s Guide 289
When the FlexRay mode is selected, you can use the Settings
softkey to access the BUSDOCTOR Menu for changing the
BUSDOCTOR 2 control/operating modes.
4 If the decode line does not appear on the display, press the
Decode softkey to turn it on. BUSDOCTOR must be connected
and running in asynchronous or synchronous mode for a
meaningful display.
5 If the oscilloscope is stopped, press the Run/Stop key to
acquire and decode data.
You can use the Delayed horizontal sweep mode for easier
navigation of the decoded data.
NOTE
Changing the BUSDOCTOR settings in the Serial Decode Menu also
changes them in the FlexRay Trigger Menu.

Agilent Technologies MSO6012A Specifications

General

Brand	Agilent Technologies
Model	MSO6012A
Category	Test Equipment
Language	English