Characteristics and Specifications 9
6000 Series Oscilloscope User’s Guide 357
Logic channels (with MSO option)
Number of channels 16 logic timing channels - labeled D15 - D0
Maximum input frequency 250 MHz
Sample rate 2 GSa/sec one pod, 1 GSa/sec each pod
Standard memory depth 2.5 Mpts one pod, 1.25 Mpts each pod
Vertical resolution 1 bit
Threshold selections TTL, CMOS, ECL, user-definable (selectable by
pod)
Maximum input voltage ±40 V peak CAT I
Glitch detection 2 ns (min pulse width)
Analog to digital conversion
Vertical resolution 8 bits
Sample rate DSO6014L: 2 GSa/sec
DSO6054L/6104L: 4 GSa/sec half channel,
2 GSa/sec each channel
Equivalent-time sample rate: 400 GSa/s (when
realtime mode is turned off)
Standard memory depth 8 Mpts per half channel, 4 Mpts per each channel
Time range 5 nsec/div to 50 sec/div (DSO6014L)
1 nsec/div to 50 sec/div (DSO6054L)
500 psec/div to 50 sec/div (DSO6104L)
Acquisition
Acquisition mode Normal, Peak Detect, Averaging, High Resolution
Peak detection DSO6014L: 1 nsec peak detect
DSO6054L/6104L: 250 psec peak detect
Averaging Selectable from 2,4,8,16,32,64... to 65536
High resolution mode Time base Bits of resolution
< 100 nsec/div 8
500 nsec/div 9
2 µsec/div 10
10 µsec/div 11
≥ 50 µsec/div 12
Filter Sinx/x interpolation
To Next Page
Loading...
Need help?
General
