Agilent X-Series Signal Generators User’s Guide 129
6 Using Pulse Modulation (Option UNW or 320)
Before using this information, you should be familiar with the basic operation of the signal generator.
If you are not comfortable with functions such as setting the power level and frequency, refer to
Chapter 3, “Basic Operation,” on page 43 and familiarize yourself with the information in that
chapter.
• Pulse Characteristics on page 131
• The Basic Procedure on page 133
• Example on page 133
• Pulse Train (Option 320 – Requires: Option UNW) on page 135
To Next Page
Loading...
Need help?
General
