Subscriber Services
7210 SAS M Services Guide Page 117
ccm-interval
Syntax ccm-interval {100ms | 1 | 10 | 60 | 600}
no ccm-interval
Context config>eth-cfm>domain>association
Description This command configures the CCM transmission interval for all MEPs in the association.
The no form of the command reverts the value to the default.
Default 10 seconds
Parameters interval — Specifies the interval between CCM transmissions to be used by all MEPs in the MA.
Values 1 second, 10 seconds, 60 seconds, 600 seconds, 100 milliseconds
remote-mepid
Syntax [no] remote-mepid mep-id
Context config>eth-cfm>domain>association
Description This command configures the remote maintenance association end point (MEP) identifier.
Parameters mep-id — Maintenance association end point identifier of a remote MEP whose information from the
MEP database is to be returned.
Values 1 — 8191
slm
Syntax slm
Context config>eth-cfm
Description This is the container that provides the global configuration parameters for ITU-T Synthetic Loss
Measurement (ETH-SL).
inactivity-timer
Syntax inactivity-timer timer
[no] inactivity-timer
Context config>eth-cfm>slm
Description The time the responder keeps a test active. The time between packets exceed this values within a test
the responder marks the previous test as complete. The timer treats any new packets from a peer with
the same test-id, source-mac and MEP-ID as a new test responding with the sequence number one.