Alcatel-Lucent 7210 SAS M - Page 320

Configuring a VPLS Service with CLI
Page 320 7210 SAS M Services Guide
Configuring Default QinQ SAPs to Pass all Traffic from Access to Access-uplink Port
without any Tag Modifications
Note: Default QinQ SAPs are supported only on 7210 SAS-M devices configured in access-uplink
mode.
The following example displays the VPLS SAP configuration of Default QinQ SAPs:
ALA-1>config>service# vpls 9 customer 1 svc-sap-type null-star create
shutdown
stp
shutdown
exit
sap 1/1/5:*.* create
statistics
ingress
received-count
exit
exit
exit
sap 1/1/6:*.* create
statistics
ingress
received-count
exit
exit
exit
exit