Virtual Private LAN Services
7210 SAS M Services Guide Page 391
Description This command specifies whether this port is allowed to become an STP root port. It corresponds to
the restrictedRole parameter in 802.1Q. If set, it can cause lack of spanning tree connectivity.
Default no root-guard
tod-suite
Syntax tod-suite tod-suite-name
no tod-suite
Context config>service>vpls>sap
Description This command applies a time-based policy (filter or QoS policy) to the service SAP. The suite name
must already exist in the config>cron context.
Default no tod-suite
Parameters tod-suite-name — Specifies collection of policies (ACLs, QoS) including time-ranges that define the
full or partial behavior of a SAP. The suite can be applied to more than one SAP.
vsi-id
Syntax vsi-id
Context config>service>vpls>bgp-ad
Description This command enables the context to configure the Virtual Switch Instance Identifier (VSI-ID).
prefix
Syntax prefix low-order-vsi-id
no prefix
Context config>service>vpls>bgp-ad>vsi-id
Description This command specifies the low-order 4 bytes used to compose the Virtual Switch Instance Identifier
(VSI-ID) to use for NLRI in BGP auto-discovery in this VPLS service.
If no value is set, the system IP address will be used.
Default no prefix
Parameters low-order-vsi-id — Specifies a unique VSI ID.
Values 0— 4294967295
To Next Page
Loading...
Need help?
General
