Alcatel-Lucent 7210 SAS M Service Guide

Virtual Private LAN Services
7210 SAS M Services Guide Page 411
Description This command enables the generation and the reception of AIS messages.
client-meg-level
Syntax client-meg-level [[level [level ...]]
no client-meg-level
Context config>service>vpls>mesh-sdp>eth-cfm>mep>ais-enable
Description This command configures the client maintenance entity group (MEG) level(s) to use for AIS message
generation. Up to 7 levels can be provisioned with the restriction that the client MEG level must be
higher than the local MEG level.
Parameters level — Specifies the client MEG level.
Values 1 — 7
Default 1
interval
Syntax interval {1 | 60}
no interval
Context config>service>vpls>mesh-sdp>eth-cfm>mep>ais-enable
Description This command specifies the transmission interval of AIS messages in seconds.
Parameters 1 | 60 — The transmission interval of AIS messages in seconds.
Default 1
priority
Syntax priority priority-value
no priority
Context config>service>vpls>mesh-sdp>eth-cfm>mep>ais-enable
Description This command specifies the priority of AIS messages originated by the node.
Parameters priority-value — Specify the priority value of the AIS messages originated by the node.
ccm-enable
Syntax [no] ccm-enable
Context config>service>vpls>mep
config>service>vpls>sap>eth-cfm>mep

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English