Virtual Private LAN Services
Page 434 7210 SAS M Services Guide
precedence
Syntax precedence precedence-value| primary
no precedence
Context config>service>vpls>spoke-sdp
Description This command configures the spoke SDP precendence.
Default 4
Parameters precedence-value — Specify the spoke SDP precedence.
Values 0 — 4
primary — Specifies that the prececence is primary.
propagate-mac-flush
Syntax [no] propagate-mac-flush
Context config>service>vpls
Description This command specifies whether MAC flush messages received from the given LDP are propagated
to all spoke and mesh SDPs within the context of this VPLS service. The propagation will follow the
split-horizon principle and any data-path blocking in order to avoid the looping of these messages.
Default no propagate-mac-flush
send-queries
Syntax [no] send-queries
Context config>service>vpls>sap>igmp-snooping
config>service>vpls>spoke-sdp>igmp-snooping
config>service>vpls>mesh-sdp>igmp-snooping
config>service>pw-template>igmp-snooping
Description This command specifies whether to send IGMP general query messages on the SAP or SDP.
When send-queries is configured, all type of queries generate ourselves are of the configured version.
If a report of a version higher than the configured version is received, the report will get dropped and
a new wrong version counter will get incremented. If send-queries is not configured, the version
command has no effect. The version used will be the version of the querier.
Default no send-queries
To Next Page
Loading...
