Page 460 7210 SAS M Services Guide
b-vpls — Creates a backbone-vpls.
create — This keyword is mandatory while creating a VPLS service.
customer customer-id — Specifies the customer ID number to be associated with the service. This
parameter is required on service creation and optional for service editing or deleting.
Values 1 — 2147483647
customer-vid vlan-id — Defines the dot1q VLAN ID to be specified while creating the local Dot1q
SAP for svc-sap-type dot1q-preserve.
Default 1 — 4094
dot1q-preserve — Specifies that the allowed SAP in the service are Dot1q. The Dot1q ID is not
stripped after packets matches the SAP.
Default null-star
m-vpls — Specifies a management VPLS.
null-star — Specifies that the allowed SAP in the service are either null SAPs or Dot1q* SAPs.
svc-sap-type — Specifies the type of service and allowed SAPs in the service.
vpn vpn-id — Specifies the VPN ID number which allows you to identify virtual private networks
(VPNs) by a VPN identification number.
Values 1 — 2147483647
Default null (0)
pbb
Syntax pbb
Context config>service
config>service>vpls
Description This command configures PBB parameters.
mac-name
Syntax mac-name name ieee-address
no mac-name name
Context config>service>pbb
Description This command configures the MAC name for the MAC address. It associates an ASCII name with an
IEEE MAC to improve the PBB Epipe configuration. It can also change the dest-BMAC in one place
instead of 1000s of Epipe.
Parameters name — Specifies the MAC name up to 32 characters in length.
ieee-address — The MAC address assigned to the MAC name. The value should be input in either a
xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx format.
To Next Page
Loading...
Need help?
General
