Alcatel-Lucent 7210 SAS M - Page 467

PBB Show Commands
7210-SAS M Services Guide Page 467
detail — Displays detailed information.
Sample Output
*A:alcag1-R6# show eth-cfm domain
==============================================================================
CFM Domain Table
==============================================================================
Md-index Level Name Format
------------------------------------------------------------------------------
1 4 ivpls charString
==============================================================================
*A:alcag1-R6#
*A:alcag1-R6# show eth-cfm mep 51 domain 1 association 1
-------------------------------------------------------------------------------
Mep Information
-------------------------------------------------------------------------------
Md-index : 1 Direction : Up
Ma-index : 1 Admin : Enabled
MepId : 51 CCM-Enable : Enabled
IfIndex : 38043648 PrimaryVid : 5
FngState : fngReset
LowestDefectPri : allDef HighestDefect : none
Defect Flags : None
Mac Address : 00:ae:ae:ae:ae:ae CcmLtmPriority : 7
CcmTx : 775 CcmSequenceErr : 0
CcmLastFailure Frame:
None
XconCcmFailure Frame:
None
*A:alcag1-R6#
mep
Syntax mep mep-id domain md-index association ma-index [loopback] [linktrace]
Context show>eth-cfm>domain
Description This command displays Maintenance Endpoint (MEP) information.
Parameters mep-id — Specifies the maintenance association end point identifier.
Values 1 — 8191
md-index — Specifies the maintenance domain (MD) index value.
Values 1 — 4294967295
ma-index — Specifies the MA index value.
Values 1 — 4294967295
loopback — Displays loopback information for the specified MEP.
linktrace — Displays linktrace information for specified MEP.