Alcatel-Lucent 7210 SAS M Service Guide

Show Commands
Page 470 7210-SAS M Services Guide
Sample Output
Sample output for PBB Epipe:
*A:7210-SAS>show>service# id 1000 all
===============================================================================
Service Detailed Information
===============================================================================
Service Id : 1000 Vpn Id : 0
Service Type : Epipe
Description : (Not Specified)
Customer Id : 1
Endpoint
Displays the endpoint name
Acct. Pol
Indicates the accounting policy applied to the SAP.
Collect Stats
Specifies whether accounting statistics are collected on the SAP.
QoS parameters
Ingress qos-pol-
icy
The SAP ingress QoS policy ID.
Classifiers Allo-
cated
Displays the number of classifiers allocated.
Classifiers Used
Displays the number of classifiers used.
Meters Allocated
Displays the number of meters allocated.
Meters Used
Displays the number of meters used.
Ingress Stats
The number of received packets/octets for this SAP.
Egress Stats
The number of packets/octets forwarded out of this SAP.
PBB Tunnel Point parameters
B-vpls
Displays the B-VPLS ID.
Backbone-dest-MAC
Displays the back bone destination MAC address.
Isid
Displays the ISID number.
Flood
Specifies whether or not the traffic is flooded in the B-VPLS for the
Destination instead of unicast. If the backbone destination MAC is in
theB-VPLS FDB, then it will be unicast.
Oper-dest-MAC
Displays the operational destination MAC address.
i-Vpls Count
Displays the count of I-VPLS bound to B-VPLS.
b-Vpls Status
Displays the operational state of the B-VPLS service.
Epipe Count
Displays the count of Epipe bound to B-VPLS.
Label Description

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English