Alcatel-Lucent 7210 SAS M Service Guide

PBB Show Commands
7210-SAS M Services Guide Page 469
Label Description
Service Id
The service identifier.
Service Type
Specifies the type of service.
Description
Generic information about the service.
Customer Id
The customer identifier.
Last Status Change
The date and time of the most recent status change to this customer.
Last Mgmt Change
The date and time of the most recent management-initiated change to
this customer.
Admin State
The administrative state of the service
Vc Switching
Displays the status of VC switching.
SAP Count
The number of SAPs specified for this service.
Uplink Type
Displays the mode of the device.
Vpn Id
The number which identifies the VPN.
Oper State
The operational state of the service.
SAP
Displays the SAP ID.
Encap
The value of the label used to identify this SAP on the access port.
QinQ Ethertype
Displays the configured QinQ Ethertype value
Dot1Q Ethertype
Displays the configured Dot1Q Ethertype value
Split Horizon
Group
Displays the split horizon group information
Admin MTU
The desired largest service frame size (in octets) that can be transmit-
ted through the port to the far-end router, without requiring the packet
to be fragmented.
Oper MTU
The actual largest service frame size (in octets) that can be transmitted
through the port to the far-end router, without requiring the packet to
be fragmented.
Ingr IP Fltr-Id
Ingress IP filter ID.
Egr IP Fltr-Id
Egress IP filter ID
Ingr Mac Fltr-Id
Ingress MAC filter ID
Egr Mac Fltr-Id
Egress MAC filter ID
Ingr IPv6 Fltr-Id
Ingress IPv6 filter ID
Egr IPv6 Fltr-Id
Egress IPv6 filter ID

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English