PBB Show Commands
7210-SAS M Services Guide Page 481
Service Access & Destination Points
-------------------------------------------------------------------------------
Identifier Type AdmMTU OprMTU Adm Opr
-------------------------------------------------------------------------------
sap:1/1/2:2 q-tag 1518 1518 Up Up
===============================================================================
*A:7210-SAS>show>service#
fdb
Syntax fdb {info | mac ieee-address | sap sap-id | detail | endpoint endpoint}
[expiry] [pbb]
Context show>service>id
Description This command displays FDB entries for a given MAC address.
Parameters sap sap-id — Specifies the physical port identifier portion of the SAP
detail — Displays detailed information.
expiry — Displays time until MAC is aged out.
endpoint — Displays endpoint information.
pbb — Displays PBB information.
Output Show FDB Information — The following table describes service FDB output fields:
Label Description
Service Id Displays the service ID.
Mac Move Rate Displays the maximum rate at which MAC's can be re-learned in
this service, before the SAP where the moving MAC was last seen
is automatically disabled in order to protect the system against
undetected loops or duplicate MAs.
The rate is computed as the maximum number of re-learns allowed
in a 5 second interval: for example, the default rate of 2 re-learns
per second corresponds to 10 re-learns in a 5 second period.
Mac Move Retries Displays the number of times retries are performed for re-enabling
the SAP.
Table Size Specifies the maximum number of learned and static entries
allowed in the FDB of this service.
Learned Count Displays the current number of learned entries in the FDB of this
service.
To Next Page
Loading...
Need help?
General
