Show Commands
Page 482 7210-SAS M Services Guide
Sample Output
*A:7210-SAS>show>service# id 200 fdb
===============================================================================
Forwarding Database, Service 200
===============================================================================
Service Id : 200 Mac Move : Disabled
Mac Move Rate : 2 Mac Move Timeout : 10
Mac Move Retries : 3
Remote Age Displays the number of seconds used to age out FDB entries
learned on an SAP. These entries correspond to MAC addresses
learned on remote SAPs.
High Watermark Displays the utilization of the FDB table of this service at which a
table full alarm will be raised by the agent.
Mac Learning Specifies whether the MAC learning process is enabled
Mac Aging Indicates whether the MAC aging process is enabled.
Mac Move Displays the administrative state of the MAC movement feature
associated with this service.
Mac Move Timeout Displays the time in seconds to wait before a SAP that has been
disabled after exceeding the maximum re-learn rate is re-enabled.
A value of zero indicates that the SAP will not be automatically re-
enabled after being disabled. If after the SAP is re-enabled it is dis-
abled again, the effective retry timeout is doubled in order to avoid
thrashing.
Total Count Displays the total number of learned entries in the FDB of this ser-
vice.
Static Count Displays the current number of static entries in the FDB of this ser-
vice.
Local Age Displays the number of seconds used to age out FDB entries
learned on local SAPs.
Low Watermark Displays the utilization of the FDB table of this service at which a
table full alarm will be cleared by the agent.
Discard Unknown Specifies whether frames received with an unknown destination
MAC are discarded.
Relearn Only Displays, that when enabled, either the FDB table of this service is
full, or that the maximum system-wide number of MAC's sup-
ported by the agent has been reached, and thus MAC
learning is temporary disabled, and only MAC re-learns can take
place.
To Next Page
Loading...
