Alcatel-Lucent 7210 SAS M Service Guide

PBB Show Commands
7210-SAS M Services Guide Page 483
Table Size : 250 Total Count : 0
Learned Count : 0 Static Count : 0
Remote Age : 900 Local Age : 300
High Watermark : 95% Low Watermark : 90%
Mac Learning : Enabled Discard Unknown : Disabled
Mac Aging : Enabled Relearn Only : False
===============================================================================
*A:7210-SAS>show>service#
*A:7210-SAS>show>service# id 2 fdb
===============================================================================
Forwarding Database, Service 2
===============================================================================
Service Id : 2 Mac Move : Disabled
Mac Move Rate : 2 Mac Move Timeout : 10
Mac Move Retries : 3
Table Size : 250 Total Count : 0
Learned Count : 0 Static Count : 0
Remote Age : 900 Local Age : 300
High Watermark : 95% Low Watermark : 90%
Mac Learning : Enabled Discard Unknown : Disabled
Mac Aging : Enabled Relearn Only : False
===============================================================================
*A:7210-SAS>show>service#
stp
Syntax stp [detail]
Context show>service>id
Description This command displays information for the spanning tree protocol instance for the service.
Parameters detail — Displays detailed information.
Output Show Service-ID STP Output — The following table describes show service-id STP output fields:
Label Description
Bridge Id Specifies the MAC address used to identify this bridge in the net-
work.
Top. Change Count Specifies the total number of topology changes detected by the
Spanning Tree Protocol instance associated with this service since
the management Entity was last reset or initialized.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English