Show Commands
Page 486 7210-SAS M Services Guide
Syntax i-vpls
Context show>service>id
Description Displays I-VPLS services associated with the B-VPLS service. This command only applies when the
service is a B-VPLS.
Output Show i-vpls Information — The following table describes service I-vpls output fields.
Sample Output
*A:7210-SAS>show>service# id 2 i-vpls
===============================================================================
Related i-Vpls services for b-Vpls service 2
===============================================================================
i-Vpls SvcId Oper ISID Admin Oper
-------------------------------------------------------------------------------
200 200 Up Up
-------------------------------------------------------------------------------
Number of Entries : 1
-------------------------------------------------------------------------------
===============================================================================
*A:7210-SAS>show>service#
epipe
Syntax epipe
Context show>service>id
Description This command displays information the Epipe information for the PBB service.
Output Show Epipe Information — The following table describes service Epipe output fields.
Label Description
i-Vpls SvcId Displays the service ID of the I-VPLS service
Oper ISID Displays the ISID number.
Admin Specifies the operating status of the service.
Oper The current status of the service.
To Next Page
Loading...
