Alcatel-Lucent 7210 SAS M Service Guide

PBB Show Commands
7210-SAS M Services Guide Page 487
Sample Output
*A:7210-SAS>show>service# id 2 epipe
===============================================================================
Related Epipe services for b-Vpls service 2
===============================================================================
Epipe SvcId Oper ISID Admin Oper
-------------------------------------------------------------------------------
1000 1000 Up Up
-------------------------------------------------------------------------------
Number of Entries : 1
-------------------------------------------------------------------------------
===============================================================================
*A:7210-SAS>show>service# id 200 epipe
isid-using
Syntax isid-using [ISID]
Context show>service
Description This command displays the services using ISID.
Parameters ISID — Displays the service using the specified I-component Service ID (ISID).
Values 0 — 16777215
Output Show Epipe Information — The following table describes service Epipe output fields.
Label Description
Epipe SvcId Displays the service ID of the EPIPE service bound to the B-VPLS
service.
Oper ISID Displays the ISID number.
Admin Specifies the operating status of the service.
Oper The current status of the service.
Label Description
SvcId The service identifier.
ISID Displays the ISID number.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English