Alcatel-Lucent 7210 SAS M Service Guide

Show Commands
Page 488 7210-SAS M Services Guide
Sample Output
*A:7210-SAS>show>service# isid-using
===================================================================
Services
===================================================================
SvcId ISID Type b-Vpls Adm Opr SvcMtu CustId
-------------------------------------------------------------------
100 100 i-VPLS 1 Up Up 1514 1
200 200 i-VPLS 2 Up Up 1514 1
1000 1000 Epipe 2 Up Up 1514 1
3000 3000 Epipe 1 Up Up 1514 1
-------------------------------------------------------------------
Matching Services : 4
-------------------------------------------------------------------
===================================================================
*A:7210-SAS>show>service#
service-using
Syntax service-using [b-vpls] [i-vpls]
Context show>service
Description This command displays the services matching certain usage properties. If no optional parameters are
specified, all services defined on the system are displayed.
Parameters b-vpls — Displays matching Epipe services.
i-vpls — Displays matching VPLS instances.
Output Show Epipe Information — The following table describes service Epipe output fields.
Type Indicates the type of service.
b-Vpls Displays the B-VPLS ID.
Admin Specifies the operating status of the service.
Oper The current status of the service.
SvcMtu Indicates the service MTU value.
Customer Id Displays the customer ID.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English