Alcatel-Lucent 7210 SAS M - Page 492

Show Commands
Page 492 7210-SAS M Services Guide
Parameters sap-id — See Common CLI Command Descriptions on page XXX for command syntax.
counters
Syntax counters
Context clear>service>statistics>id
Description This command clears all traffic queue counters associated with the service ID.
stp
Syntax stp
Context clear>service>statistics>id
Description Clears all spanning tree statistics for the service ID.
detected-protocols
Syntax detected-protocols {all | sap sap-id}
Context clear>service>id>stp
Description RSTP automatically falls back to STP mode when it receives an STP BPDU. The clear detected
protocols command forces the system to revert to the default RSTP mode on the SAP.
Parameters all — Clears all detected protocol statistics.
sap-id — Clears the specified lease state SAP information.