Alcatel-Lucent 7210 SAS M - Page 518

IES Services Command Reference
Page 518 7210-SAS M Services Guide
— icmp
— redirects [number seconds]
—no redirects
— ttl-expired [number seconds]
—no ttl-expired
— unreachables [number seconds]
—no unreachables
—[no] loopback
— [no] ieee-address
—[no] sap sap-id [create]
— [no] shutdown
— [no] static-arp ip-address [ieee-address]
—[no] vrrp virtual-router-id
Routed VPLS Commands (applicable for access-uplink mode)
Note: These commands are supported only in Access-Uplink mode.
config
—service
— ies service-id [customer customer-id] [vpn vpn-id]
— interface ip-interface-name [create]
—no interface-interface-name
— vpls service-name
—no vpls
— ingress
— v4-routed-override-filter ip-filter-id
—no v4-routed-override-filter