Alcatel-Lucent 7210 SAS M Service Guide

VPRN Service Configuration Commands
Page 602 7210 SAS M Services Guide
Values 0 — 63
dscp-name — Specifies the DSCP name.
Values none, be, ef, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cp9, cs1, cs2, cs3, cs4, cs5, nc1, nc2,
af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, cp11, cp13,
cp15, cp17, cp19, cp21, cp23, cp25, cp27, cp29, cp31, cp33, cp35, cp37, cp39,
cp41, cp42, cp43, cp44, cp45, cp47, cp49, cp50, cp51, cp52, cp53, cp54, cp55,
cp57, cp58, cp59, cp60, cp61, cp62, cp63
dot1p-priority — Specifies the Dot1P priority.
Values 0 — 7
dot1p-app-name — Specifies the Dot1P application name.
Values arp, isis
dscp
Syntax dscp dscp-name fc fc-name
no dscp dscp-name
Context config>service>vprn>sgt-qos
Description This command creates a mapping between the DiffServ Code Point (DSCP) of the self generated
traffic and the forwarding class.
Self generated traffic that matches the specified DSCP will be assigned to the corresponding
forwarding class. Multiple commands can be entered to define the association of some or all sixty-
four DiffServ code points to the forwarding class. For undefined code points, packets are assigned to
the forwarding class specified under the default-action command.
All DSCP names that defines a DSCP value must be explicitly defined.
The no form of this command removes the DiffServ code point to forwarding class association. The
default-action then applies to that code point value.
Default none
Parameters dscp-name — The name of the DiffServ code point to be associated with the forwarding class.
DiffServ code point can only be specified by its name and only an existing DiffServ code point
can be specified. The software provides names for the well known code points.
Values be, ef, cp1, cp2, cp3, cp4, cp5, cp6, cp7, cp9, cs1, cs2, cs3, cs4, cs5, nc1, nc2, af11,
af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43, cp11, cp13, cp15,
cp17, cp19, cp21, cp23, cp25, cp27, cp29, cp31, cp33, cp35, cp37, cp39, cp41,
cp42, cp43, cp44, cp45, cp47, cp49, cp50, cp51, cp52, cp53, cp54, cp55, cp57,
cp58, cp59, cp60, cp61, cp62, cp63
fc fc-name — Specifies the forwarding class name. All packets with DSCP value or MPLS EXP bits
that is not defined will be placed in this forwarding class.
Default None, the fc name must be specified
Values be, l2, af, l1, h2, ef, h1, nc

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English