Alcatel-Lucent 7210 SAS M Service Guide

Show, Clear, Debug Commands
Page 686 7210 SAS M Services Guide
Ethernet Tunnel MEP Defect Legend:
R = Rdi, M = MacStatus, C = RemoteCCM, E = ErrorCCM, X = XconCCM
*A:NS1015C0821>show#
Output Show Ethernet Ring — The following table describes show command output fields.
*A:NS1015C0821>show# eth-ring 10
===============================================================================
Ethernet Ring 10 Information
===============================================================================
Description : (Not Specified)
Admin State : Down Oper State : Down
Node ID : 00:25:ba:03:48:04
Guard Time : 5 deciseconds RPL Node : rplNone
Max Revert Time : 300 seconds Time to Revert : N/A
CCM Hold Down Time : 0 centiseconds CCM Hold Up Time : 20 deciseconds
Compatible Version : 2
APS Tx PDU : N/A
Label Description
Description
The ring description
Admin State
Displays the administrative state
Oper State
Displays the operational state
Node ID
Displays the node identifier
Guard Time
Displays the configured guard time
Max Revert time
Displays the configured maximum revert time
CCM Hold down time
Displays the configured CCM Hold down time
APS TX PDU
Displays the APS TX PDU information
Defect Status
Displays the defect status
RPL Node
Displays the RPL node information
Time to revert
Displays the configured time to revert
CCM Hold Up Time
Displays the configured CCM Hold up time
Sub-Ring Type
Displays the sub-ring type information, the sub-ring type can be virtual
link or on-virtual link.
Interconnect-ID
Displays the interconnect ID. The ID can be a ring-index ID or VPLS
service ID.
Compatible Ver-
sion
Displays the Ethernet ring version information.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English