Alcatel-Lucent 7210 SAS M Service Guide

Service Commands
7210 SAS M Services Guide Page 685
eth-ring
Syntax eth-ring [status]
eth-ring ring-index [path {a|b}]
Context show
Description This command displays the Ethernet rings information.
Parameters status — Displays the status information of the Ethernet rings configured on the system.
path {a|b} — Displays information related to the configured Ethernet rings.
ring-index — Specifies the ring index of the Ethernet ring.
Values 1—128
Output Show Ethernet Ring Status — The following table describes show command output fields.
*A:NS1015C0821>show# eth-ring status
===============================================================================
Ethernet Ring (Status information)
===============================================================================
Ring Admin Oper Path Information MEP Information
ID State State Path Tag State Ctrl-MEP CC-Intvl Defects
-------------------------------------------------------------------------------
1 Up Up a - 1/1/1 100 Up Yes 100ms -----
b - 1/1/2 100 Up Yes 100ms -----
10 Down Down a - N/A - - - -----
b - N/A - - - -----
===============================================================================
Label Description
Ring Id
The ring identifier
Admin State
Displays the administrative state
Oper State
Displays the operational state
Path Information
Path
Displays the path information
Tag
Displays the tag information
State
Displays the state of the path
MEP Information
Ctrl-MEP
Displays the Ctrl-MEP information
CC-Intvl
Displays the Ctrl-Interval information
Defects
Displays the defects

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English