Show, Clear, Debug Commands
Page 688 7210 SAS M Services Guide
ETH-CFM Show Commands
eth-cfm
Syntax eth-cfm
Context show
Description This command enables the context to display eth-cfm information.
association
Syntax association [ma-index] [detail]
Context show>eth-cfm
Description This command displays eth-cfm association information.
Parameters ma-index — Specifies the maintenance association (MA) index.
Values 1— 4294967295
detail — Displays detailed information for the eth-cfm association.
Output Show eth-cfm Association Command Output — The following table describes show eth-cfm
association command output fields:
Label Description
Md-index
Displays the the maintenance domain (MD) index.
Ma-index
Displays the the maintenance association (MA) index.
Name
Displays the part of the maintenance association identifier which is unique
within the maintenance domain name.
CCM-interval
Displays the CCM transmission interval for all MEPs in the association.
Bridge-id
Displays the bridge-identifier value for the domain association.
MHF Creation
Displays the MIP half function (MHF) for the association.
Primary VLAN
Displays the primary bridge-identifier VLAN ID.
Num Vids
Displays the number of VIDs associated with the VLAN.
Remote Mep Id
Displays the remote maintenance association end point (MEP) identifier