Alcatel-Lucent 7210 SAS M Service Guide

IES Show Commands
7210-SAS M Services Guide Page 717
Values 32 characters maximum
detail — Displays detailed IP interface information.
Default IP interface summary output.
Output Show Service-ID — The following table describes show service-id output fields.
Sample Output
A:ALA-49# show service id 88 interface
===============================================================================
Interface Table
===============================================================================
Interface-Name Adm Opr(v4/v6) Type Port/SapId
Label Description
If Name
The name used to refer to the IES interface.
Type
Specifies the interface type.
IP-Address
Specifies the IP address/IP subnet/broadcast address of the interface.
Adm
The administrative state of the interface.
Opr
The operational state of the interface.
Admin State
The administrative state of the interface.
Oper State
The operational state of the interface.
IP Addr/mask
Specifies the IP address/IP subnet/broadcast address of the interface.
If Index
The index corresponding to this IES interface. The primary index is 1;
all IES interfaces are defined in the base virtual router context.
If Type
Specifies the interface type.
SAP Id
Specifies the SAP’s port ID.
SNTP B.Cast
Specifies whether SNTP broadcast client mode is enabled or disabled.
Arp Timeout
Specifies the timeout for an ARP entry learned on the interface.
MAC Address
Specifies the 48-bit IEEE 802.3 MAC address.
ICMP Mask Reply
Specifies whether ICMP mask reply is enabled or disabled.
Cflowd
Specifies whether Cflowd collection and analysis on the interface is
enabled or disabled.
Redirects
Specifies the rate for ICMP redirect messages.
Unreachables
Specifies the rate for ICMP unreachable messages.
TTL Expired
Specifies the rate for ICMP TTL messages.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English