VPRN Show Commands
7210-SAS M Services Guide Page 733
Vrf Target
Specifies the VRF target applied to this service.
Vrf Import
Specifies the VRF import policy applied to this service.
Vrf Export
Specifies the VRF export policy applied to this service.
Description
Generic information about the service.
SAP Count
The number of SAPs specified for this service.
SDP Bind Count
The number of SDPs bound to this service.
Split Horizon
Group
Name of the split horizon group for this service.
Description
Description of the split horizon group.
Last Changed
The date and time of the most recent management-initiated change to
this split horizon group.
Service Destination Points (SDPs)
SDP Id
The SDP identifier.
Type
Indicates whether this Service SDP binding is a spoke or a mesh.
Admin Path MTU
The desired largest service frame size (in octets) that can be transmit-
ted through this SDP to the far-end router, without requiring the packet
to be fragmented.
Oper Path MTU
The actual largest service frame size (in octets) that can be transmitted
through this SDP to the far-end router, without requiring the packet to
be fragmented.
Delivery
Specifies the type of delivery used by the SDP: GRE or MPLS.
Admin State
The administrative state of this SDP.
Oper State
The operational state of this SDP.
Ingress Label
The label used by the far-end device to send packets to this device in
this service by this SDP.
Egress Label
The label used by this device to send packets to the far-end device in
this service by this SDP.
Ingress Filter
The ID of the ingress filter policy.
Egress Filter
The ID of the egress filter policy.
Far End
Specifies the IP address of the remote end of the MPLS tunnel defined
by this SDP.
Last Changed
The date and time of the most recent change to this customer.
Signaling
Specifies the signaling protocol used to obtain the ingress and egress
labels used in frames transmitted and received on this SDP.
Label Description
To Next Page
Loading...
Need help?
General
