EasyManua.ls Logo

Alcatel-Lucent 7210 SAS M - Page 736

Alcatel-Lucent 7210 SAS M
952 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Show, Clear, Debug Commands
Page 736 7210-SAS M Services Guide
Meters Used
Number of SAP ingress meters in use.
Ingress Stats
The number of received packets/octets for this SAP.
Egress Stats
The number of packets/octets forwarded out of this SAP.
Ingress Drop Stats
Number of packets/octets dropped by the system.
Extra-Tag Drop
Stats
Number of packets received with the count of VLAN tags exceeding
the count of VLAN tags implied by the SAP encapsulation.
Ingress Meter 1
The index of the ingress QoS meter of this SAP.
For. InProf
Number of in-profile packets/octets received on this SAP.
For. OutProf
Number of out-of-profile packets/octets received on this SAP.
If Name
IP interface name assigned by user.
Protocols
Protocols enabled for use on this interface.
Oper (v4/v6)
Operational status of this interface for IPv4 and IPv6.
IP Addr/mask
IPv4 address and Mask assigned to this interface.
Address Type
Whether the address is a primary or secondary address.
Broadcast Address
Type of broadcast address used. It can be host-ones or all-ones.
If Index
The interface Index assigned by the system. It is used with SNMP IfT-
able.
Virt. If Index
The interface index assigned by the system. It is used with SNMP.
Last Oper Chg
Timestamp associated with the last operational change.
Global If Index
This is the system wide Interface index allotted by the system.
If Type
Network — The IP interface is a network/core IP interface.
Service — The IP interface is a service IP interface.
SNTP B.Cast
Specifies whether SNTP broadcast client mode is enabled or disabled.
Arp Timeout
Specifies the timeout for an ARP entry learned on the interface.
IP Oper MTU
The actual largest service frame size (in octets) that can be transmitted
through the port to the far-end router, without requiring the packet to
be fragmented.
LdpSyncTimer
Specifies the value used for IGP-LDP synchronization.
Redirects
Specifies the rate for ICMP redirect messages.
Unreachables
Specifies the rate for ICMP unreachable messages.
TTL Expired
Specifies the rate for ICMP TTL messages.
Label Description

Table of Contents

Other manuals for Alcatel-Lucent 7210 SAS M

Related product manuals