Alcatel-Lucent 7210 SAS M Service Guide

VPRN Show Commands
7210-SAS M Services Guide Page 761
group
Syntax group [name] [detail]
Context show>router>bgp
Description This command displays group information for a BGP peer group. This command can be entered with
or without parameters.
When this command is entered without a group name, information about all peer groups displays.
When the command is issued with a specific group name, information only pertaining to that specific
peer group displays.
The ‘State’ field displays the BGP group’s operational state. Other valid states are:
Up - BGP global process is configured and running.
Down - BGP global process is administratively shutdown and not running.
Disabled - BGP global process is operationally disabled. The process must be restarted by the
operator.
Parameters name — Displays information for the BGP group specified.
detail — Displays detailed information.
Output Standard and Detailed Group Output — The following table describes the standard and
detailed command output fields for a BGP group:
Sample Output
Label Description
Group
BGP group name
Group Type
No Type — Peer type not configured.
External — Peer type configured as external BGP peers.
Internal — Peer type configured as internal BGP peers.
State
Disabled — The BGP peer group has been operationally disabled.
Down — The BGP peer group is operationally inactive.
Up — The BGP peer group is operationally active.
Peer AS
The configured or inherited peer AS for the specified peer group.
Local AS
The configured or inherited local AS for the specified peer group.
Local Address
The configured or inherited local address for originating peering for
the specified peer group.
Loop Detect
The configured or inherited loop detect setting for the specified peer
group.
Connect Retry
The configured or inherited connect retry timer value.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English