EasyManuals Logo

Alcatel-Lucent 7210 SAS M Service Guide

Alcatel-Lucent 7210 SAS M
952 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #762 background imageLoading...
Page #762 background image
Show, Clear, Debug Commands
Page 762 7210-SAS M Services Guide
Authentication
None — No authentication is configured.
MD5 — MD5 authentication is configured.
Local Pref
The configured or inherited local preference value.
MED Out
The configured or inherited MED value assigned to advertised routes
without a MED attribute.
Min Route Advt.
The minimum amount of time that must pass between route updates for
the same IP prefix.
Min AS Originate
The minimum amount of time that must pass between updates for a
route originated by the local router.
Multihop
The maximum number of router hops a BGP connection can traverse.
Multipath
The configured or inherited multipath value, determining the maxi-
mum number of ECMP routes BGP can advertise to the RTM.
Prefix Limit
No Limit — No route limit assigned to the BGP peer group.
1 - 4294967295 — The maximum number of routes BGP can
learn from a peer.
Passive
Disabled — BGP attempts to establish BGP connections with
neighbors in the specified peer group.
Enabled — BGP will not actively attempt to establish BGP connec-
tions with neighbors in the specified peer group.
Next Hop Self
Disabled — BGP is not configured to send only its own IP address
as the BGP nexthop in route updates to neighbors in the peer group.
Enabled — BGP sends only its own IP address as the BGP nexthop
in route updates to neighbors in the specified peer group.
Aggregator ID 0
Disabled — BGP is not configured to set the aggregator ID to
0.0.0.0 in all originated route aggregates sent to the neighbor in the
peer group.
Enabled — BGP is configured to set the aggregator ID to 0.0.0.0 in
all originated route aggregates sent to the neighbor in the peer group.
Remove Private
Disabled — BGP will not remove all private AS numbers from the
AS path attribute in updates sent to the neighbor in the peer group.
Enabled — BGP removes all private AS numbers from the AS path
attribute in updates sent to the neighbor in the peer group.
Damping
Disabled — The peer group is configured not to dampen route
flaps.
Label Description (Continued)

Table of Contents

Other manuals for Alcatel-Lucent 7210 SAS M

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Alcatel-Lucent 7210 SAS M and is the answer not in the manual?

Alcatel-Lucent 7210 SAS M Specifications

General IconGeneral
BrandAlcatel-Lucent
Model7210 SAS M
CategorySwitch
LanguageEnglish

Related product manuals