Alcatel-Lucent 7210 SAS M - Page 787

VPRN Show Commands
7210-SAS M Services Guide Page 787
===============================================================================
*A:ALA-12#
*A:ALA-12# show router 3 static-arp to-ser1
==============================================================================
ARP Table
==============================================================================
IP Address MAC Address Age Type Interface
------------------------------------------------------------------------------
10.200.0.253 00:00:5a:40:00:01 00:00:00 Sta to-ser1
===============================================================================
S*A:ALA-12#
*A:ALA-12# show router 3 static-arp mac 00:00:5a:40:00:01
==============================================================================
ARP Table
==============================================================================
IP Address MAC Address Age Type Interface
-------------------------------------------------------------------------------
10.200.0.253 00:00:5a:40:00:01 00:00:00 Sta to-ser1
==============================================================================
*A:ALA-12#
static-route
Syntax static-route [ip-prefix /mask] | [preference preference] | [next-hop ip-addr] [detail]
Context show>router
Description This command displays the static entries in the routing table.
If no options are present. all static routes are displayed sorted by prefix.
Parameters ip-prefix /mask — Displays static routes only matching the specified ip-prefix and mask.
preference preference — Only displays static routes with the specified route preference.
Values 0 — 65535
next-hop ip-addr — Only displays static routes with the specified next hop IP address.
detail — Displays detailed information about the static route.
Output Show Static Route Output — The following table describes the output fields for the static route
table:
Label Description
IP Addr/mask
The static route destination address and mask.
Pref
The route preference value for the static route.
Metric
The route metric value for the static route.
Type
BH — The static route is a black hole route. The Nexthop for this
type of route is
black-hole.