Alcatel-Lucent 7210 SAS M Service Guide

Show, Clear, Debug Commands
Page 890 7210 SAS M Services Guide
base
Syntax base [msap]
Context show>service>id
show>service>id>igmp-snooping
Description This command displays basic information about the service ID including service type, description,
SAPs and SDP.
Output Show Service-ID Base — The following table describes show service-id base output fields:
Other — Local entries for the IP interfaces created.
Expiry
The age of the ARP entry.
Interface
The interface applied to the service.
SAP
The SAP ID.
Label Description
Label Description
Service Id The service identifier.
Service Type
Displays the type of service.
Description
Generic information about the service.
Customer Id
The customer identifier.
Last Mgmt Change
The date and time of the most recent management-initiated change to
this customer.
Adm
The administrative state of the service.
Oper
The operational state of the service.
Mtu
The largest frame size (in octets) that the port can handle.
Adm
The largest frame size (in octets) that the SAP can handle.
SAP Count
The number of SAPs defined on the service.
Identifier
Specifies the service access (SAP).
OprMTU
Specifies the actual largest service frame size (in octets) that can be
transmitted through this port, without requiring the packet to be frag-
mented.
Opr
The operating state of the SAP

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English