Alcatel-Lucent 7210 SAS M Service Guide

Show, Clear, Debug Commands
Page 894 7210 SAS M Services Guide
Sample Output
A:Dut-A# show service id 305 fdb
===============================================================================
Forwarding Database, Service 305
===============================================================================
Service Id : 305 Mac Move : Disabled
Mac Move Rate : 2 Mac Move Timeout : 10
Table Size : 500 Total Count : 375
Learned Count : 375 Static Count : 0
Remote Age : 60 Local Age : 60
High WaterMark : 95% Low Watermark : 90%
Mac Learning : Enabl Discard Unknown : Dsabl
Mac Aging : Enabl Relearn Only : False
===============================================================================
A:Dut-A#
host
Syntax host [sap sap-id] [detail]
host summary
Context show>service>id
Description This command displays static host information configured on this service.
Parameters sap-id — Specifies the physical port identifier portion of the SAP definition. See Common CLI
Command Descriptions on page 939 for command syntax.
summary — Displays summary host information.
labels
Syntax labels
Context show>service>id
Description This command displays the labels being used by the service.
Output Show Service-ID Labels — The following table describes show service-id labels output fields:
Static — Statically configured.
Last Change
Indicates the time of the most recent state changes.
Label Description
Label Description
Svc Id
The service identifier.
Sdp Id
The SDP identifier.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English