Alcatel-Lucent 7210 SAS M - Page 897

VPLS Show Commands
7210 SAS M Services Guide Page 897
mrouters
Syntax mrouters [detail]
Context show>service>id>mld-snooping
Description This command displays all multicast routers.
mstp-configuration
Syntax mstp-configuration
Context show>service>id
Description This command displays the MSTP specific configuration data. This command is only valid on a
management VPLS.
Output Show Service-ID SAP — The following table describes show service mstp fields:
.
Sample Output
*A:SASMX>show>service>id# mstp-configuration
==============================================
Mstp configuration info, Service 5
==============================================
Region Name : abc
Region Revision : 0
MST Max Hops : 20
===============================================================================
vlan to MST instance mapping
===============================================================================
Instance Priority Vlans mapped
-------------------------------------------------------------------------------
2 0
===============================================================================
*A:SASMX>show>service>id#
Label Description
Region Name
Displays the MSTP region name.
Region Revision
Displays the MSTP region revision.
MST Max Hops
Displays the MSTP maximum hops specified.
Instance
Displays the MSTP instance number.
Priority
Displays the MSTP priority.
Vlans mapped
Displays the VLAN range of the MSTP instance.