Alcatel-Lucent 7210 SAS M Service Guide

Show, Clear, Debug Commands
Page 898 7210 SAS M Services Guide
sap
Syntax sap sap-id [filter]
Context show>service>id
Description This command displays information for the SAPs associated with the service.
If no optional parameters are specified, a summary of all associated SAPs is displayed.
Parameters sap sap-id — The ID that displays SAPs for the service in the slot/mda/port[.channel] form. See
Common CLI Command Descriptions on page 939 for command syntax.
detail — Displays detailed information for the SAP.
Show Service-ID SAP — The following table describes show service SAP fields:
.
Label Description
Service Id
The service identifier.
SAP
The SAP and qtag.
Encap
The encapsulation type of the SAP.
Ethertype
Specifies an Ethernet type II Ethertype value.
Admin State
The administrative state of the SAP.
Oper State
The operational state of the SAP.
Flags
Specifies the conditions that affect the operating status of this SAP.
Display output includes: ServiceAdminDown, SapAdminDown, Inter-
faceAdminDown, PortOperDown, L2OperDown, RelearnLimitEx-
ceeded, ParentIfAdminDown,
NoSapIpipeCeIpAddr, TodResourceUnavail,
TodMssResourceUnavail, SapParamMismatch,
CemSapNoEcidOrMacAddr, StandByForMcRing,
SapIngressNamedPoolMismatch, SapEgressNamedPoolMismatch,
NoSapEpipeRingNode.
Last Status Change
Specifies the time of the most recent operating status change to this
SAP
Last Mgmt Change
Specifies the time of the most recent management-initiated change to
this SAP.
Ingress qos-pol-
icy
The ingress QoS policy ID assigned to the SAP.
Ingress Filter-Id
The ingress filter policy ID assigned to the SAP.
Egress Filter-Id
The egress filter policy ID assigned to the SAP.
Acct. Pol
The accounting policy ID assigned to the SAP.
Collect Stats
Specifies whether collect stats is enabled.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English