Alcatel-Lucent 7210 SAS M - Page 919

VPLS Show Commands
7210 SAS M Services Guide Page 919
mrouters
Syntax mrouters [detail]
Context show>service>id>igmp-snooping
Description This command displays all multicast routers.
Parameters detail — Displays detailed information.
Sample Output
A:7210-SAS>show>service>id# igmp-snooping mrouters
===============================================================================
IGMP Snooping Multicast Routers for service 1
===============================================================================
MRouter Sap/Sdp Id Up Time Expires Version
-------------------------------------------------------------------------------
1.1.1.1 1/1/1 0d 16:53:44 254s 2
-------------------------------------------------------------------------------
Number of mrouters: 1
===============================================================================
A:7210-SAS>show>service>id#
mvr
Syntax mvr
Context show>service>id>igmp-snooping
Description This command displays Multicast VPLS Registration (MVR) information.
Label Description
MVR Admin State Administrative state.
MVR Policy Policy name.
Svc ID The service identifier.
Sap/Sdp Id Displays the SAP and SDP IDs of the service ID.
Oper State Displays the operational state of the SAP and SDP IDs of the svcid.
Mrtr Port Specifies if the port is a multicast router port.
From VPLS
Specifies from which VPLS the multicast streams corresponding to
the groups learned via this SAP will be copied. If local, it is from its
own VPLS.